Installing a new well pump — whether for new construction, a well that's never had one properly sized, or an upgrade — comes down to matching the pump to the well, not just dropping in whatever's on the truck.
Pump installation starts with a few numbers that matter more than brand or price: the well's static water level, the pumping (drawdown) level under load, the well's yield in gallons per minute, and the total dynamic head the pump has to push against — depth plus friction loss plus elevation to the pressure tank. Undersize a pump and it can't keep up with peak household demand; oversize it and you get short-cycling and premature wear. We measure before we quote.
Most wells deeper than about 25 feet call for a submersible pump — it sits down in the well casing itself, near or above the well screen, and pushes water up rather than pulling it. Submersibles are quieter, don't lose prime, and are the standard choice for deep residential wells. Shallower wells, or situations where surface access matters more than depth capacity, may use a jet pump instead, mounted above ground at the wellhead or in a pump house. We'll walk you through which setup fits your well rather than defaulting to one option.
If you're building on rural acreage around Fayetteville or just had a new well drilled, we handle the pump installation side of the project — coordinating with your well driller on casing depth and screen placement so the pump goes in at the right setting from day one.
Not sure if you need a new pump or a repair? A pump that's still running but underperforming often just needs diagnostic work first. See our well pump replacement page or call us to talk through the symptoms.
Call us to talk through your well specs and household water needs.
Call (000) 000-0000